PR-487-143727-W01 Modelling and Simulation of Subsurface Fluid Migration from Small Pipeline Leaks

May 10, 2017

The focus of this study was to determine the influence of subsurface engineered boundaries associated with the trench walls, and the presence of a water table, upon the leakage behavior of a range of hydrocarbon products. The project numerically modelled three products which were chosen to span a range of fluid types and viscosities. Laboratory simulations of leakage were carried out for the most viscous product in order to capture plume dispersion in semi-real time, and to allow numerical More…predictions to be assessed against experimental data._x000D_

_x000D_

Expected Benefits/Learning Outcomes

– Recommendations for the use and placement of generic leak detection sensor types (e.g liquid, gas, thermal, displacement) within the trench and / or above the ground surface._x000D_

– Suggested monitoring locations taking into account requirements to detect pipeline leakage as early as possible in order to facilitate notification of the operator._x000D_

– Prediction of potential extent of site characterization required during spill response and longer term remediation activities.

You Might Also Like

PR214-234504-W01 MAT-1-8 Post-Heating and Interpass Control Webinar

This webinar describes the work undertaken to numerically model the hydrogen diffusion in in-service fillet welds across a wide variety of pipe attributes, welding conditions, and thermal conditions. The document includes recommendations for post-welding...

PR015-242008-W01 Recompression System Best Practice Guideline

This project surveyed project member companies for recompression data during their day-to-day operations. This data was compiled and incorporated into the conceptual design of cost-effective packages aimed at maximizing value without compromising throughput. Major...